John Deere 2038R Compact Tractor
Original price was: $56,741.10.$31,253.00Current price is: $31,253.00.
🚚 Delivery Options
- AutoConnect™ Drive-over Mower Decks up to 72 inches
- Model is on larger, heavier frame for added stability
- Standard cruise control, 12-V outlet and premium seating
Features
Collapse All
Powerful, high-torque diesel engine delivers superb efficiency
Yanmar 3-cylinder, TNV series diesel engine
2032R
The 1.642-L (100.2-cu in.) displacement, liquid-cooled 3TNV88C-NJT Yanmar® diesel engine provides 22.9 kW ( 30.7 hp) to the 2032R.
| Model | Number of cylinders | Engine displacement | Aspiration | Gross engine power* | Gross engine PS* | Power take-off (PTO) power* |
| 2032R | 3 | 1.642 L (110.2 cu in.) | Natural | 22.9 kW (30.7 hp) | 31.2 PS | 18 kW (24.2 hp) |
*Engine kW (hp), gross SAE J1995: 22.9 (30.7) at 2500 rpm, PS
Displacement, L (cu in).: 1.642 (100.2)
2038R
The 1.568-L (95.8-cu in.) displacement, turbocharged liquid-cooled 3TNV86T-NJT Yanmar diesel engine provides 27.4 kW ( 36.7 hp) to the 2038R.
| Model | Number of cylinders | Engine displacement | Aspiration | Gross engine power* | Gross engine PS* | PTO power* |
| 2038R | 3 | 1.568 L (95.8 cu in.) | Turbocharged | 27.4 kW (36.7 hp) | 37.2 PS | 22.7 kW (30.4 hp) |
*Engine kW (hp), gross SAE J1995: 27.4 (36.7) at 2500 rpm, PS
Displacement, L (cu in.): 1.568 (95.8)
The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.
The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and a lower cost of operation.
The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.
The engine comes with an aftertreatment system. The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).
After many hours of use, the exhaust filter may require an ash removal service.
DOC/DPF
Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:
- A prescribed time-based estimation of needed filter cleaning
- DOC/DPF pressure sensors
- A particulate matter buildup estimation based on load conditions
Once one of the three conditions have been met, filter cleaning will occur. There are three different types of filter cleaning processes:
- Passive filter cleaning
- Active filter cleaning
- Parked filter cleaning
Passive filter cleaning
Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.
NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.
Active filter cleaning
If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then particulate matter is removed using active filter cleaner.
To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize particulate matter.
It is important to note that at no time is fuel in the DOC/DPF ignited, and there is no interruption to tractor operation.
Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.
Parked filter cleaning
In some instances where passive and active filter cleaning have not fully cleaned the particulate matter from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.
The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.
The emissions system on this engine constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.
NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.
For more information regarding Environmental Protection Agency (EPA) regulations and the technology behind John Deere Integrated Emissions Control systems, click here.
Yanmar TNV Series engine offers these features:
- Economical cast-in-block cylinder design for good cooling and long life
- Direct fuel injection
- Improves starting
- Injects fuel directly on top of pistons for more efficient combustion
- Develops more horsepower per gallon of fuel than indirect injection engines
- Aluminum alloy pistons are lightweight to reduce connecting rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, which reduces blow-by and noise from piston slap
- Top rings are higher on the piston and a thinner head gasket is used to greatly reduce the volume of unburned waste gases and increase combustion efficiency
- Timing gears and injector drive gears have a helical profile to reduce engine noise
- Auto-bleed fuel system
- There is no need to prime the system if the tractor runs out of fuel
- The system self-primes the injection pump, lines and injectors, providing fast fuel recovery for easier starting
- High-capacity lubrication system provides filtered oil, under pressure, to all engine bearings for long life
- Fuel filter with replaceable element
- Water separator with additional replaceable filter element
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Dry-type air cleaner with safety element
- Dual element design for added engine protection
- Air cleaner service indicator is standard equipment on all models and alerts the operator on the instrument panels
- Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels
Yanmar is a trademark of Yanmar Co., Ltd.
Easy-to-use hydrostatic transmission (HST) increases productivity
The 2032R and 2038R Tractors are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.
- No clutching for fast and easy direction changes
- Twin Touch™ foot pedals for quick and easy forward/reverse operation
- Transmission oil cooler cools transmission oil for longer transmission life
Safety features of the HST transmission include:
- The tractor will only start with the range lever in neutral
- If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
- The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged
Twin Touch foot controls
Twin Touch foot controls
Key John Deere advantages – John Deere’s Twin Touch foot controls offer several key advantages over competitive HST models tractors.
- Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the HST
- Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
- The Twin Touch configuration also makes it easier to inch the tractor forward or rearward (i.e., when attaching to implements)
Integrated hydrostatic pump and motor
- Sauer-Danfoss® manufacturer provides the integrated pump and motor; this assures that the components are matched to each other, providing maximum efficiency
- Provides strength and durability needed for operating such attachments as loaders and backhoes
- One reservoir (with one check-point and fill point) for the transmission, differential, and hydraulic system speeds up daily maintenance
- Mechanically actuated by Twin Touch foot pedals allow the operator to select both directions of travel and speed with the touch of a toe
Cruise control
An electronic cruise control is standard equipment on the 2032R and 2038R Tractors. Cruise control is electronically engaged and disengaged using a toggle switch located on the right-hand console.
- Maintains desired forward speed without having to touch the forward pedal
- To disengage the cruise control, either apply pressure to the brake pedal or disengage the cruise control switch
Sauer-Danfoss is a trademark of Sauer-Danfoss Incorporated.
Operator station is comfortable and convenient
Operator Station
The operator station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color coded controls allow for easy identification and operation. The design of the operator station allows operators to sit “in” as opposed to “on” which provides comfort and increased stability.
Below are other key features of the 2032R and 2038R Tractor operator’s station:
- Sloping hood design provides improved visibility
- Plenty of room for comfortable operation
- Cup holder, multiple storage compartments and a 12V outlet ensures an organized operator station
- Rubberized floor mat design to reduce vibration and noise
- Step-through operator platform makes getting on and off the tractor easy
- Fender-mounted handrails, large and easy to grab, assist the operator when getting on and off the tractor
- Controls have been raised and integrated into the fender for operator comfort and ease of use
- Large, easy to read decals provide clear instructions for experienced and even non experienced operators
- Front horizontal exhaust for increased operator visibility
- If the operator leaves the tractor seat when the transmission, mid PTO, or rear PTO is engaged, the engine will shut down
- For applications where out-of-seat PTO operation is required, the following criteria must be met: transmission in neutral, park brake engaged, and PTO selector set to rear only. See operator’s manual for specific instructions.
- Specially designed panels route hot air flow from the engine compartment under the tractor instead of directly onto the operator
Left-side step
Left-side entrance step
- The left-side step allows for easy access on and off the tractor
- Foot platform has a non-skid surface
Premium seat
Premium high-back seat
The thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements.
- Seat adjusts fore/aft for operator convenience
- Seat flips forward for protection from the elements
- High seat back and armrests are in base equipment and allow for a more comfortable operation
- Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls
Key features of the operator’s station include:
- Tilt steering wheel design in base equipment on the 2032R and 2038R Tractors
- Allows the operator to adjust the steering wheel to the most comfortable position
- Provides additional clearance for the operator to enter and exit the tractor
- Provides easy return to the fully raised position
- Provides plenty of room for comfortable operation
Tilt steering lever
- Easy-fold ROPS allows tractor to be used or stored in low clearance environments
Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-Hitch (LVB25976)
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.
- All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
- Upper bushing
- Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
- Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
- Lower bushings
- Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
- Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
CommandCut™ controls allows quick and accurate height of cut adjustments
Instrument panel
CommandCut™ controls
The 2032R and 2038R tractors features the CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator. Some of the key benefits of this system are:
- Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.
- Inhibits PTO operation when mower deck is in the install position to prevent PTO driveling and mower deck blade damage
- Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions
- Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf
- Precise height of cut with no drift or leakdown
- System can be calibrated to different tire sizes to maintain precision
- Minimum effort required to set height of cut and to raise/lower the mower deck which reduces operator fatigue
- Easy to read graphical interface on the instrument panel allows operator to glance at the desired height of cut while staying focused on mowing
- Built in transport lock can be activated from the seat by turning the height of cut dial to position 6 and raising the deck to the highest position
Excellent serviceability and diagnostics reduce operational cost and improves productivity
Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.
- Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive ServiceADVISOR™ system.
- Four quarter turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Quarter turn fasteners
Right tractor side panel removed
- Easy access to regular service points minimizes service time
- Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels
- Tractors are equipped with an electronic air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed
Air filter restriction sensor
- Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
- All external engine, fuel and transmission filters are easily accessible
- Increased service intervals lessen overall cost of ownership
- Hydraulic oil service interval increased to 1200 hours when using Hy-Gard™ products
- Hydraulic oil filter will need to be changed every 400 hours
- Fuel tank is located on the rear of the tractor to allow for easy access when fueling
Fuel Tank
- Gas-lift hood support eliminates the need for a mechanical prop rod
Gas-lift hood shocks
All items in the daily service schedule can be performed without the use of tools:
- Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed
- The engine can be easily accessed by simply raising the hood for more periodic maintenance checks
NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.
Specifications
–Please Select–
Add Model
–Please Select–
| Specifications | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications |
John Deere 2038R Compact Tractor |
Key Specs
| Engine power (gross) | At SAE J1995 rated power: 27.4 kW 36.7 hp |
|||
|---|---|---|---|---|
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
|||
| Steering hydraulics | 15 L/min 4 gpm |
|||
| Implement hydraulics | 20.2 L/min 5.3 gpm |
|||
| Hitch type | Category 1 | |||
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
|||
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) | |||
| Cruise control | Standard | |||
| Approximate shipping weight (open-station; cab) | Open station: 1320 kg 2910 lb Cab: Not applicable |
|||
| Wheelbase | 1723 mm 67.8 in. |
Engine
| Family | ||||
|---|---|---|---|---|
| Manufacturer | Yanmar® | |||
| Engine model | 3TNV88C-NJT | |||
| Engine power (gross) | At SAE J1995 rated power: 27.4 kW 36.7 hp |
|||
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
|||
| Rated engine speed | 2500 rpm | |||
| Type | Direct Injection | |||
| Injection pump type | Direct Injection | |||
| Aspiration | Turbocharged | |||
| Emissions compliance | Final Tier 4 | |||
| Cylinders/displacement | Three cylinders: 1.568 L 95.8 cu in. |
|||
| Number of cylinders | Three | |||
| Cylinder liners | Cast-in-block | |||
| Bore and stroke | 86×90 mm 3.39×3.54 in. |
|||
| Compression ratio | 19.1:1 | |||
| Lubrication | Pressurized | |||
| Cooling system | Water pump | |||
| Air cleaner | Dual element | |||
| Engine torque at rated speed | 104.7 Nm 77.2 lb-ft |
|||
| Fuel tank capacity | 32 L 8.5 U.S. gal. |
Electrical
| Battery size | 500 CCA | |||
|---|---|---|---|---|
| Alternator (12-V) | 85 amp | |||
| Starter size | 1.4 kW 1.9 hp |
Fuel system
| Type | Direct Injection | |||
|---|---|---|---|---|
| Fuel consumption |
Transmission
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) | |||
|---|---|---|---|---|
| Optional transmission; forward/reverse | ||||
| Left-hand reverser | ||||
| Transmission gear ranges | ||||
| Final drive | Spur gear | |||
| Brakes | Wet disc | |||
| Steering | Power steering | |||
| Clutch, wet/dry | ||||
| Clutch disk diameter wet clutch | ||||
| Axle capacity | Front 880 kg 1940 lb Rear 1800 kg 3968 lb |
|||
| Creeper | No | |||
| Cruise control | Standard | |||
| Differential lock | Yes | |||
| Drawbar maximum vertical load |
Hydraulics
| Type | Open center | |||
|---|---|---|---|---|
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
|||
| Pump type | Dual gear | |||
| Maximum operating pressure | 172 bar 2495 psi |
|||
| Draft control sensing | Position control | |||
| Remote control valves available | Up to three |
3-point hitch
| Type | Category 1 | |||
|---|---|---|---|---|
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Power take-off (PTO)
| Standard | Rear: 543 rpm Mid: 1998 rpm |
|||
|---|---|---|---|---|
| Optional | ||||
| Control | Independent | |||
| Clutch | Wet disc | |||
| Brake (for mid and rear PTO) | Wet disc | |||
| Engagement method |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
|||
|---|---|---|---|---|
| Transmission and hydraulic system |
Final drive
| Type | Spur Gear | |||
|---|---|---|---|---|
| Differential lock | Yes |
Operator station
| Rollover protective structure | Type Foldable ASABE S478 |
|||
|---|---|---|---|---|
| Platform – flat/straddle | Semi-flat | |||
| Gear shift location – console/floor |
Cab
| Compliance | ||||
|---|---|---|---|---|
| Visibility | ||||
| Air conditioning, temperature differential | ||||
| Doors | ||||
| Noise rating | ||||
| Seat equipment |
Dimensions
| Height | ||||
|---|---|---|---|---|
| Wheelbase | 1723 mm 67.8 in. |
|||
| Front axle clearance | ||||
| Turning radius with brakes | 2.46 m 8.07 ft |
|||
| Turning radius without brakes | ||||
| Limited slip differential | ||||
| Approximate shipping weight (open-station; cab) | Open station: 1320 kg 2910 lb Cab: Not applicable |
Tires
| Front | R1 Ag 7.00-12 R3 Turf 23×8.50-14 R4 Industrial 23×8.50-14 R3 Turf Radial 200/60 R15 |
|||
|---|---|---|---|---|
| Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
|||
| Front tread range | ||||
| Rear tread spacing |
Miscellaneous
| Toolbox | Yes | |||
|---|---|---|---|---|
| Tilt steering wheel | Yes | |||
| 12-V Outlet | Yes |
Additional information
| Date collected |
|---|
window.specificationData = {“relatedProducts”:[{“name”:”2025R (Model year 2020)”,”model”:”2025RLV”,”id”:”2025rlv-2025r-(model-year-2020)”,”listName”:”2025R (Model year 2020)”,”brand”:”John Deere”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”12.8 kW
17.2 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:”13.4 L/min
3.5 gpm”},{“id”:”key-specs-implement-hydraulics”,”value”:”13.4 L/min
3.5 gpm”},{“id”:”key-specs-hitch-type”,”value”:”Limited Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”415 kg
915 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – two range”},{“id”:”key-specs-cruise-control”,”value”:”Standard”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb”},{“id”:”key-specs-wheelbase”,”value”:”1600 mm
63 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Yanmar®”},{“id”:”engine-engine-model”,”value”:”3TNV80F-NCJT”},{“id”:”engine-engine-power-(gross)”,”value”:”SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”12.8 kW
17.2 hp”},{“id”:”engine-rated-engine-speed”,”value”:”3200 rpm”},{“id”:”engine-type”,”value”:”Diesel”},{“id”:”engine-injection-pump-type”,”value”:”Indirect injection”},{“id”:”engine-aspiration”,”value”:”Natural”},{“id”:”engine-emissions-compliance”,”value”:”Final Tier 4″},{“id”:”engine-cylinders/displacement”,”value”:”Three cylinders: 1.267 L
77 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Three”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”80 x 84 mm
3.2 x 3.3 in.”},{“id”:”engine-compression-ratio”,”value”:”23.1:01″},{“id”:”engine-lubrication”,”value”:”Pressurized”},{“id”:”engine-cooling-system”,”value”:”Water pump”},{“id”:”engine-air-cleaner”,”value”:”Dual element”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:”53.1 Nm
39.1 lb-ft”},{“id”:”engine-fuel-tank-capacity”,”value”:”20.4 L
5.39 gal.”},{“id”:”electrical-battery-size”,”value”:”500 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”40 amp”},{“id”:”electrical-starter-size”,”value”:”1.2 kW
1.6 hp”},{“id”:”fuel-system-type”,”value”:”Indirect injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – two range”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:””},{“id”:”transmission-left-hand-reverser”,”value”:”No”},{“id”:”transmission-transmission-gear-ranges”,”value”:””},{“id”:”transmission-final-drive”,”value”:”Spur gear”},{“id”:”transmission-brakes”,”value”:”Wet disc”},{“id”:”transmission-steering”,”value”:”Power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Front
612 kg
1349 lb
Rear
1100 kg
2425 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Standard”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”Steering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Gear”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:”137 bar
1987 psi”},{“id”:”hydraulics-draft-control-sensing”,”value”:”Position control”},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Two”},{“id”:”3-point-hitch-type”,”value”:”Limited Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”415 kg
915 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear – 540 rpm
Mid – 2100 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:””},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:”Wet disk”},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:”Wet disk”},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:”2.7 L
2.9 qt”},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:””},{“id”:”final-drive-type”,”value”:”Spur gear”},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
OSHA, SAE, ASAE”},{“id”:”operator-station-platform—flat/straddle”,”value”:”Three-piece semi flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:”Left-hand side”},{“id”:”cab-compliance”,”value”:””},{“id”:”cab-visibility”,”value”:””},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:””},{“id”:”cab-doors”,”value”:””},{“id”:”cab-noise-rating”,”value”:””},{“id”:”cab-seat-equipment”,”value”:””},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”1600 mm
63 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:””},{“id”:”dimensions-turning-radius-with-brakes”,”value”:””},{“id”:”dimensions-turning-radius-without-brakes”,”value”:”Outside front tire: 2.51 m
8.2 ft”},{“id”:”dimensions-limited-slip-differential”,”value”:”No”},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb”},{“id”:”tires-front”,”value”:”R3 Turf: 23×8.50-12
R3 Radial: 220/55-R12
R4 Industrial: 23×8.50-12″},{“id”:”tires-rear”,”value”:”R3 Turf: 12-16.5
R3 Radial: 280/70 R16
R4 Industrial: 12-16.5″},{“id”:”tires-front-tread-range”,”value”:””},{“id”:”tires-rear-tread-spacing”,”value”:””},{“id”:”miscellaneous-toolbox”,”value”:”Yes”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:”Yes”},{“id”:”miscellaneous-12-v-outlet”,”value”:”Yes”},{“id”:”additional-information-date-collected”,”value”:””}]},{“name”:”2032R (Model year 2020)”,”model”:”2032RLV”,”id”:”2032rlv-2032r-(model-year-2020)”,”listName”:”2032R (Model year 2020)”,”brand”:”John Deere”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”At SAE J1995 rated power: 22.9 kW
31.2 hp”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”18 kW
24.2 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:”15 L/min
4 gpm”},{“id”:”key-specs-implement-hydraulics”,”value”:”20.2 L/min
5.3 gpm”},{“id”:”key-specs-hitch-type”,”value”:”Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”615 kg
1356 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic transmission (HST)”},{“id”:”key-specs-cruise-control”,”value”:”Standard”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 1306 kg
2879 lb
Cab: Not applicable”},{“id”:”key-specs-wheelbase”,”value”:”1723 mm
67.8 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Yanmar®”},{“id”:”engine-engine-model”,”value”:”3TNV88C-NJT2″},{“id”:”engine-engine-power-(gross)”,”value”:”At SAE J1995 rated power: 22.9 kW
31.2 hp”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”18 kW
24.2 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2500 rpm”},{“id”:”engine-type”,”value”:”Direct Injection”},{“id”:”engine-injection-pump-type”,”value”:”Direct Injection”},{“id”:”engine-aspiration”,”value”:”Natural”},{“id”:”engine-emissions-compliance”,”value”:”Final Tier 4″},{“id”:”engine-cylinders/displacement”,”value”:”Three cylinders: 1.642 L
100.2 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Three”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”88×90 mm
3.46×3.54 in.”},{“id”:”engine-compression-ratio”,”value”:”19.1:1″},{“id”:”engine-lubrication”,”value”:”Pressurized”},{“id”:”engine-cooling-system”,”value”:”Water pump”},{“id”:”engine-air-cleaner”,”value”:”Dual element”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:”87.5 Nm
64.5 lb-ft”},{“id”:”engine-fuel-tank-capacity”,”value”:”32 L
8.5 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:”500 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”85 amp”},{“id”:”electrical-starter-size”,”value”:”1.4 kW
1.9 hp”},{“id”:”fuel-system-type”,”value”:”Direct Injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic transmission (HST)”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:””},{“id”:”transmission-left-hand-reverser”,”value”:””},{“id”:”transmission-transmission-gear-ranges”,”value”:””},{“id”:”transmission-final-drive”,”value”:”Spur gear”},{“id”:”transmission-brakes”,”value”:”Wet disc”},{“id”:”transmission-steering”,”value”:”Power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Front
880 kg
1940 lb
Rear
1800 kg
3968 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Standard”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:”500 kg
1102 lb”},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Dual gear”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:”172 bar
2495 psi”},{“id”:”hydraulics-draft-control-sensing”,”value”:”Position control”},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Up to three”},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”615 kg
1356 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear: 543 rpm
Mid: 1998 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:””},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:”Wet disc”},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:”Wet disc”},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:”4.5 L
4.8 qt”},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:””},{“id”:”final-drive-type”,”value”:”Spur Gear”},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
ASABE S478″},{“id”:”operator-station-platform—flat/straddle”,”value”:”Semi-flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:””},{“id”:”cab-compliance”,”value”:””},{“id”:”cab-visibility”,”value”:””},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:””},{“id”:”cab-doors”,”value”:””},{“id”:”cab-noise-rating”,”value”:””},{“id”:”cab-seat-equipment”,”value”:””},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”1723 mm
67.8 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:””},{“id”:”dimensions-turning-radius-with-brakes”,”value”:”2.46 m
8.07 ft”},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:””},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 1306 kg
2879 lb
Cab: Not applicable”},{“id”:”tires-front”,”value”:”R1 Ag 7.00-12
R3 Turf 23×8.50-14
R4 Industrial 23×8.50-14
R3 Turf Radial 200/60 R15″},{“id”:”tires-rear”,”value”:”R1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20″},{“id”:”tires-front-tread-range”,”value”:””},{“id”:”tires-rear-tread-spacing”,”value”:””},{“id”:”miscellaneous-toolbox”,”value”:”Yes”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:”Yes”},{“id”:”miscellaneous-12-v-outlet”,”value”:”Yes”},{“id”:”additional-information-date-collected”,”value”:””}]},{“name”:”B3200 HSD”,”model”:”NA”,”id”:”na-b3200-hsd”,”listName”:”Kubota – B3200 HSD”,”brand”:”Kubota”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”97/68/EC rated power
23.9 kW
32 hp”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”17.2 kW
23 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:”12.2 L/min
3.22 gpm”},{“id”:”key-specs-implement-hydraulics”,”value”:”25.3 L/min
6.68 gpm”},{“id”:”key-specs-hitch-type”,”value”:”Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”590 kg
1300 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – 3 range”},{“id”:”key-specs-cruise-control”,”value”:”Standard”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”800 kg
1764 lb”},{“id”:”key-specs-wheelbase”,”value”:”166.6 cm
65.6 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Kubota E-TVCS”},{“id”:”engine-engine-model”,”value”:”V1505-E3-D24″},{“id”:”engine-engine-power-(gross)”,”value”:”23.9 kW
32 hp
97/68/EC rated power”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”17.2 kW
23 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2700 rpm”},{“id”:”engine-type”,”value”:”Diesel”},{“id”:”engine-injection-pump-type”,”value”:”Indirect injection”},{“id”:”engine-aspiration”,”value”:”Natural”},{“id”:”engine-emissions-compliance”,”value”:””},{“id”:”engine-cylinders/displacement”,”value”:”4 / 1.5 L
4 / 91.5 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Four”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”78.7×78.7 mm
3.1×3.1 in.”},{“id”:”engine-compression-ratio”,”value”:””},{“id”:”engine-lubrication”,”value”:”Forced”},{“id”:”engine-cooling-system”,”value”:”Pressurized radiator”},{“id”:”engine-air-cleaner”,”value”:”Dual-air cleaner standard”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:””},{“id”:”engine-fuel-tank-capacity”,”value”:”30.7 L
8.1 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:”433 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”40 amp”},{“id”:”electrical-starter-size”,”value”:””},{“id”:”fuel-system-type”,”value”:”Indirect injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – 3 range”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:”No”},{“id”:”transmission-left-hand-reverser”,”value”:”No”},{“id”:”transmission-transmission-gear-ranges”,”value”:”Hydrostatic – 3 range”},{“id”:”transmission-final-drive”,”value”:”Spur gear”},{“id”:”transmission-brakes”,”value”:”Multi-plate wet disc”},{“id”:”transmission-steering”,”value”:”Integral power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:”Dry, single-plate”},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Rear
1000 kg
2205 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Standard”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”Steering
12.2 L/min
3.22 gpm
Implement
25.3 L/min
6.68 gpm
37.5 L/min
9.9 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Dual”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:””},{“id”:”hydraulics-draft-control-sensing”,”value”:”Quarter-inching valve”},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Up to three”},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”590 kg
1300 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Mid – 2500 rpm
Rear – 540 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:”No”},{“id”:”power-take-off-(pto)-control”,”value”:”Live”},{“id”:”power-take-off-(pto)-clutch”,”value”:””},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:””},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:”5.4 L
5.7 qt”},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:”3.83 (14.5 L)”},{“id”:”final-drive-type”,”value”:”Spur gear”},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
Yes”},{“id”:”operator-station-platform—flat/straddle”,”value”:”Flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:”Left-hand side”},{“id”:”cab-compliance”,”value”:”NA”},{“id”:”cab-visibility”,”value”:”NA”},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:”NA”},{“id”:”cab-doors”,”value”:”NA”},{“id”:”cab-noise-rating”,”value”:”NA”},{“id”:”cab-seat-equipment”,”value”:”NA”},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”166.6 cm
65.6 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:”370 mm
14.6 in.”},{“id”:”dimensions-turning-radius-with-brakes”,”value”:”2.1 m
6.9 ft”},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:”No”},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”800 kg
1764 lb”},{“id”:”tires-front”,”value”:”Farm – 7-12 R1
Turf – 24×8.80-14
R4 – 25×8.5-14″},{“id”:”tires-rear”,”value”:”Farm – 12.4-16 R1
Turf – 13.6-16
R4 – 15-19.5″},{“id”:”tires-front-tread-range”,”value”:”93.5 cm
36.8 in.”},{“id”:”tires-rear-tread-spacing”,”value”:”104.9 cm
41.3 in.”},{“id”:”miscellaneous-toolbox”,”value”:”Standard”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:””},{“id”:”miscellaneous-12-v-outlet”,”value”:””},{“id”:”additional-information-date-collected”,”value”:””}]},{“name”:”B3350HSD”,”model”:”NA”,”id”:”na-b3350hsd”,”listName”:”Kubota – B3350HSD”,”brand”:”Kubota”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”23 kW
30.8 hp”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”20.1 kW
27 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:””},{“id”:”key-specs-implement-hydraulics”,”value”:””},{“id”:”key-specs-hitch-type”,”value”:”Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”760 kg
1676 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – three range”},{“id”:”key-specs-cruise-control”,”value”:”Yes”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”860 kg
1896 lb”},{“id”:”key-specs-wheelbase”,”value”:”1666 mm
65.6 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Kubota”},{“id”:”engine-engine-model”,”value”:”V1505-T-E4-D26-R”},{“id”:”engine-engine-power-(gross)”,”value”:”23 kW
30.8 hp”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”20.1 kW
27 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2500 rpm”},{“id”:”engine-type”,”value”:”Diesel”},{“id”:”engine-injection-pump-type”,”value”:”Indirect injection”},{“id”:”engine-aspiration”,”value”:”Natural”},{“id”:”engine-emissions-compliance”,”value”:”Final Tier 4″},{“id”:”engine-cylinders/displacement”,”value”:”Four cylinders: 1.5 L
91.5 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Four”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”78×78.4 mm
3.1×3.1 in.”},{“id”:”engine-compression-ratio”,”value”:””},{“id”:”engine-lubrication”,”value”:”Forced”},{“id”:”engine-cooling-system”,”value”:”Liquid”},{“id”:”engine-air-cleaner”,”value”:”Dual-paper element”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:””},{“id”:”engine-fuel-tank-capacity”,”value”:”27.5 L
7.3 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:””},{“id”:”electrical-alternator-(12-v)”,”value”:””},{“id”:”electrical-starter-size”,”value”:””},{“id”:”fuel-system-type”,”value”:”Indirect injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – three range”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:”No”},{“id”:”transmission-left-hand-reverser”,”value”:”No”},{“id”:”transmission-transmission-gear-ranges”,”value”:”Hydrostatic – three range”},{“id”:”transmission-final-drive”,”value”:””},{“id”:”transmission-brakes”,”value”:”Multi-plate wet disc”},{“id”:”transmission-steering”,”value”:”Power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Front
1000 kg
2205 lb
Rear
1000 kg
2205 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Yes”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”33.1 L/min
8.7 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Dual”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:””},{“id”:”hydraulics-draft-control-sensing”,”value”:”Position control”},{“id”:”hydraulics-remote-control-valves-available”,”value”:””},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”760 kg
1676 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear: 540 rpm
Mid: 2500 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:”No”},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:””},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:””},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:””},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:””},{“id”:”final-drive-type”,”value”:””},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
Yes”},{“id”:”operator-station-platform—flat/straddle”,”value”:”Flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:”Left-hand side”},{“id”:”cab-compliance”,”value”:””},{“id”:”cab-visibility”,”value”:””},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:”Yes”},{“id”:”cab-doors”,”value”:”Two”},{“id”:”cab-noise-rating”,”value”:””},{“id”:”cab-seat-equipment”,”value”:”Deluxe Suspension”},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”1666 mm
65.6 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:”370 mm
14.6 in.”},{“id”:”dimensions-turning-radius-with-brakes”,”value”:”2.1 m
6.9 ft”},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:”No”},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”860 kg
1896 lb”},{“id”:”tires-front”,”value”:”R1 Ag: 7-12
R3 Turf: 24×8.50-14
R4 Industrial: 23×8.50-14 or 25×8.50-14
R14 Radial: 23×8.50-12 or 23×8.50-14″},{“id”:”tires-rear”,”value”:”R1 Ag: 12.4-16
R3 Turf: 13.6-16
R4 Industrial: 12.4-16 or 15-19.5
R14 Radial: 14-17.5 or 15-19.5″},{“id”:”tires-front-tread-range”,”value”:””},{“id”:”tires-rear-tread-spacing”,”value”:””},{“id”:”miscellaneous-toolbox”,”value”:”Yes”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:”Yes”},{“id”:”miscellaneous-12-v-outlet”,”value”:”Yes”},{“id”:”additional-information-date-collected”,”value”:””}]},{“name”:”B3350SUHSD”,”model”:”NA”,”id”:”na-b3350suhsd”,”listName”:”Kubota – B3350SUHSD”,”brand”:”Kubota”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”24.6 kW
33 hp”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”20.1 kW
27 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:”14 L/min
3.7 gpm”},{“id”:”key-specs-implement-hydraulics”,”value”:”18.9 L/min
5 gpm”},{“id”:”key-specs-hitch-type”,”value”:”Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”760 kg
1676 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – 3 range”},{“id”:”key-specs-cruise-control”,”value”:”Yes”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”850 kg
1874 lb”},{“id”:”key-specs-wheelbase”,”value”:”166.6 cm
65.6 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Kubota”},{“id”:”engine-engine-model”,”value”:”V1505-T-E4-D26-R”},{“id”:”engine-engine-power-(gross)”,”value”:”24.6 kW
33 hp”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”20.1 kW
27 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2500 rpm”},{“id”:”engine-type”,”value”:”Diesel”},{“id”:”engine-injection-pump-type”,”value”:”Indirect injection”},{“id”:”engine-aspiration”,”value”:”Natural”},{“id”:”engine-emissions-compliance”,”value”:”Final Tier 4″},{“id”:”engine-cylinders/displacement”,”value”:”4 / 1.5 L
4 / 91.5 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Four”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”78×78.4 mm
3.1×3.1 in.”},{“id”:”engine-compression-ratio”,”value”:””},{“id”:”engine-lubrication”,”value”:”Forced”},{“id”:”engine-cooling-system”,”value”:”Liquid”},{“id”:”engine-air-cleaner”,”value”:”Dual-paper element”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:””},{“id”:”engine-fuel-tank-capacity”,”value”:”27.5 L
7.3 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:”430 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”60 amp”},{“id”:”electrical-starter-size”,”value”:””},{“id”:”fuel-system-type”,”value”:”Indirect injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – 3 range”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:”No”},{“id”:”transmission-left-hand-reverser”,”value”:”No”},{“id”:”transmission-transmission-gear-ranges”,”value”:”Hydrostatic – 3 range”},{“id”:”transmission-final-drive”,”value”:”Spur gear”},{“id”:”transmission-brakes”,”value”:”Wet disc”},{“id”:”transmission-steering”,”value”:”Hydrostatic power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Front
1000 kg
2205 lb
Rear
1000 kg
2205 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Yes”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”Steering
14 L/min
3.7 gpm
Implement
18.9 L/min
5 gpm
33.1 L/min
8.7 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Dual”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:””},{“id”:”hydraulics-draft-control-sensing”,”value”:”Quarter-inching valve”},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Up to two”},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”760 kg
1676 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear – 540 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:”No”},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:””},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:””},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:”4.1 L
4.3 qt”},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:”4.0 (15 L)”},{“id”:”final-drive-type”,”value”:”Spur gear”},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
Yes”},{“id”:”operator-station-platform—flat/straddle”,”value”:”Flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:”Left-hand side”},{“id”:”cab-compliance”,”value”:”NA”},{“id”:”cab-visibility”,”value”:”NA”},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:”NA”},{“id”:”cab-doors”,”value”:”NA”},{“id”:”cab-noise-rating”,”value”:”NA”},{“id”:”cab-seat-equipment”,”value”:”NA”},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”166.6 cm
65.6 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:”370 mm
14.6 in.”},{“id”:”dimensions-turning-radius-with-brakes”,”value”:”2.1 m
6.9 ft”},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:”No”},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”850 kg
1874 lb”},{“id”:”tires-front”,”value”:”Farm – 7-12
Turf – 24×8.50-14
R4 – 23×8.50-14 or 25×8.50-14″},{“id”:”tires-rear”,”value”:”Farm – 12.4-16
Turf – 13.6-16
R4 – 12.4-16 or 15-19.5″},{“id”:”tires-front-tread-range”,”value”:”93.5 cm
36.8 in.”},{“id”:”tires-rear-tread-spacing”,”value”:”104.9 cm
41.3 in.”},{“id”:”miscellaneous-toolbox”,”value”:”Yes”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:”Yes”},{“id”:”miscellaneous-12-v-outlet”,”value”:”Yes”},{“id”:”additional-information-date-collected”,”value”:””}]},{“name”:”Boomer 20″,”model”:”NA”,”id”:”na-boomer-20″,”listName”:”New Holland – Boomer 20″,”brand”:”New Holland”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:””},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:””},{“id”:”key-specs-steering-hydraulics”,”value”:””},{“id”:”key-specs-implement-hydraulics”,”value”:””},{“id”:”key-specs-hitch-type”,”value”:””},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:””},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:””},{“id”:”key-specs-cruise-control”,”value”:””},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:””},{“id”:”key-specs-wheelbase”,”value”:””},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Mitsubishi”},{“id”:”engine-engine-model”,”value”:””},{“id”:”engine-engine-power-(gross)”,”value”:”16.9 kW
23 hp
97/68/EC rated power”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”12.1 kW
16.5 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2700 rpm”},{“id”:”engine-type”,”value”:””},{“id”:”engine-injection-pump-type”,”value”:””},{“id”:”engine-aspiration”,”value”:””},{“id”:”engine-emissions-compliance”,”value”:””},{“id”:”engine-cylinders/displacement”,”value”:”3 / 1.1 L
3 / 68.7 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Three”},{“id”:”engine-cylinder-liners”,”value”:””},{“id”:”engine-bore-and-stroke”,”value”:””},{“id”:”engine-compression-ratio”,”value”:””},{“id”:”engine-lubrication”,”value”:””},{“id”:”engine-cooling-system”,”value”:””},{“id”:”engine-air-cleaner”,”value”:””},{“id”:”engine-engine-torque-at-rated-speed”,”value”:””},{“id”:”engine-fuel-tank-capacity”,”value”:”25 L
6.6 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:”560 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”50 amp”},{“id”:”electrical-starter-size”,”value”:””},{“id”:”fuel-system-type”,”value”:””},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic – 2 range”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:””},{“id”:”transmission-left-hand-reverser”,”value”:””},{“id”:”transmission-transmission-gear-ranges”,”value”:””},{“id”:”transmission-final-drive”,”value”:””},{“id”:”transmission-brakes”,”value”:”Wet disc”},{“id”:”transmission-steering”,”value”:”Power”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:””},{“id”:”transmission-creeper”,”value”:””},{“id”:”transmission-cruise-control”,”value”:””},{“id”:”transmission-differential-lock”,”value”:””},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:””},{“id”:”hydraulics-pump-rated-output”,”value”:””},{“id”:”hydraulics-pump-type”,”value”:””},{“id”:”hydraulics-maximum-operating-pressure”,”value”:””},{“id”:”hydraulics-draft-control-sensing”,”value”:””},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Two”},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”318 kg
700 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear – 540 rpm
Mid – 2000 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:””},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:”Electro-hydraulic”},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:””},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:””},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:””},{“id”:”final-drive-type”,”value”:””},{“id”:”final-drive-differential-lock”,”value”:””},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
Yes”},{“id”:”operator-station-platform—flat/straddle”,”value”:”Flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:””},{“id”:”cab-compliance”,”value”:””},{“id”:”cab-visibility”,”value”:””},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:””},{“id”:”cab-doors”,”value”:””},{“id”:”cab-noise-rating”,”value”:””},{“id”:”cab-seat-equipment”,”value”:””},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:””},{“id”:”dimensions-front-axle-clearance”,”value”:””},{“id”:”dimensions-turning-radius-with-brakes”,”value”:””},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:””},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”772 kg
1702 lb”},{“id”:”tires-front”,”value”:”Turf – 18×8.50-8 4PR”},{“id”:”tires-rear”,”value”:”Turf – 26×12-12 4PR”},{“id”:”tires-front-tread-range”,”value”:””},{“id”:”tires-rear-tread-spacing”,”value”:””},{“id”:”miscellaneous-toolbox”,”value”:””},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:””},{“id”:”miscellaneous-12-v-outlet”,”value”:””},{“id”:”additional-information-date-collected”,”value”:””}]}],”closestComparison”:[],”currentModel”:{“name”:”Compact Tractor”,”model”:”2038R”,”id”:”Current Model ID”,”detailURL”:”#”,”listName”:”Compact Tractor”,”brand”:”John Deere”,”specifications”:[{“id”:”key-specs-engine-power-(gross)”,”value”:”At SAE J1995 rated power: 27.4 kW
36.7 hp”},{“id”:”key-specs-power-take-off-(pto)-power”,”value”:”22.7 kW
30.4 hp”},{“id”:”key-specs-steering-hydraulics”,”value”:”15 L/min
4 gpm”},{“id”:”key-specs-implement-hydraulics”,”value”:”20.2 L/min
5.3 gpm”},{“id”:”key-specs-hitch-type”,”value”:”Category 1″},{“id”:”key-specs-lift-capacity,-24-in.-behind-link-arms”,”value”:”615 kg
1356 lb”},{“id”:”key-specs-standard-transmission;-forward/reverse”,”value”:”Hydrostatic transmission (HST)”},{“id”:”key-specs-cruise-control”,”value”:”Standard”},{“id”:”key-specs-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 1320 kg
2910 lb
Cab: Not applicable”},{“id”:”key-specs-wheelbase”,”value”:”1723 mm
67.8 in.”},{“id”:”engine-family”,”value”:””},{“id”:”engine-manufacturer”,”value”:”Yanmar®”},{“id”:”engine-engine-model”,”value”:”3TNV88C-NJT”},{“id”:”engine-engine-power-(gross)”,”value”:”At SAE J1995 rated power: 27.4 kW
36.7 hp”},{“id”:”engine-power-take-off-(pto)-power”,”value”:”22.7 kW
30.4 hp”},{“id”:”engine-rated-engine-speed”,”value”:”2500 rpm”},{“id”:”engine-type”,”value”:”Direct Injection”},{“id”:”engine-injection-pump-type”,”value”:”Direct Injection”},{“id”:”engine-aspiration”,”value”:”Turbocharged”},{“id”:”engine-emissions-compliance”,”value”:”Final Tier 4″},{“id”:”engine-cylinders/displacement”,”value”:”Three cylinders: 1.568 L
95.8 cu in.”},{“id”:”engine-number-of-cylinders”,”value”:”Three”},{“id”:”engine-cylinder-liners”,”value”:”Cast-in-block”},{“id”:”engine-bore-and-stroke”,”value”:”86×90 mm
3.39×3.54 in.”},{“id”:”engine-compression-ratio”,”value”:”19.1:1″},{“id”:”engine-lubrication”,”value”:”Pressurized”},{“id”:”engine-cooling-system”,”value”:”Water pump”},{“id”:”engine-air-cleaner”,”value”:”Dual element”},{“id”:”engine-engine-torque-at-rated-speed”,”value”:”104.7 Nm
77.2 lb-ft”},{“id”:”engine-fuel-tank-capacity”,”value”:”32 L
8.5 U.S. gal.”},{“id”:”electrical-battery-size”,”value”:”500 CCA”},{“id”:”electrical-alternator-(12-v)”,”value”:”85 amp”},{“id”:”electrical-starter-size”,”value”:”1.4 kW
1.9 hp”},{“id”:”fuel-system-type”,”value”:”Direct Injection”},{“id”:”fuel-system-fuel-consumption”,”value”:””},{“id”:”transmission-standard-transmission;-forward/reverse”,”value”:”Hydrostatic transmission (HST)”},{“id”:”transmission-optional-transmission;-forward/reverse”,”value”:””},{“id”:”transmission-left-hand-reverser”,”value”:””},{“id”:”transmission-transmission-gear-ranges”,”value”:””},{“id”:”transmission-final-drive”,”value”:”Spur gear”},{“id”:”transmission-brakes”,”value”:”Wet disc”},{“id”:”transmission-steering”,”value”:”Power steering”},{“id”:”transmission-clutch,-wet/dry”,”value”:””},{“id”:”transmission-clutch-disk-diameter-wet-clutch”,”value”:””},{“id”:”transmission-axle-capacity”,”value”:”Front
880 kg
1940 lb
Rear
1800 kg
3968 lb
“},{“id”:”transmission-creeper”,”value”:”No”},{“id”:”transmission-cruise-control”,”value”:”Standard”},{“id”:”transmission-differential-lock”,”value”:”Yes”},{“id”:”transmission-drawbar-maximum-vertical-load”,”value”:””},{“id”:”hydraulics-type”,”value”:”Open center”},{“id”:”hydraulics-pump-rated-output”,”value”:”Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm”},{“id”:”hydraulics-pump-type”,”value”:”Dual gear”},{“id”:”hydraulics-maximum-operating-pressure”,”value”:”172 bar
2495 psi”},{“id”:”hydraulics-draft-control-sensing”,”value”:”Position control”},{“id”:”hydraulics-remote-control-valves-available”,”value”:”Up to three”},{“id”:”3-point-hitch-type”,”value”:”Category 1″},{“id”:”3-point-hitch-lift-capacity,-24-in.-behind-link-arms”,”value”:”615 kg
1356 lb”},{“id”:”power-take-off-(pto)-standard”,”value”:”Rear: 543 rpm
Mid: 1998 rpm”},{“id”:”power-take-off-(pto)-optional”,”value”:””},{“id”:”power-take-off-(pto)-control”,”value”:”Independent”},{“id”:”power-take-off-(pto)-clutch”,”value”:”Wet disc”},{“id”:”power-take-off-(pto)-brake-(for-mid-and-rear-pto)”,”value”:”Wet disc”},{“id”:”power-take-off-(pto)-engagement-method”,”value”:””},{“id”:”fluid-capacities-crankcase-with-filter”,”value”:”4.5 L
4.8 qt”},{“id”:”fluid-capacities-transmission-and-hydraulic-system”,”value”:””},{“id”:”final-drive-type”,”value”:”Spur Gear”},{“id”:”final-drive-differential-lock”,”value”:”Yes”},{“id”:”operator-station-rollover-protective-structure”,”value”:”Type
Foldable
ASABE S478″},{“id”:”operator-station-platform—flat/straddle”,”value”:”Semi-flat”},{“id”:”operator-station-gear-shift-location—console/floor”,”value”:””},{“id”:”cab-compliance”,”value”:””},{“id”:”cab-visibility”,”value”:””},{“id”:”cab-air-conditioning,-temperature-differential”,”value”:””},{“id”:”cab-doors”,”value”:””},{“id”:”cab-noise-rating”,”value”:””},{“id”:”cab-seat-equipment”,”value”:””},{“id”:”dimensions-height”,”value”:””},{“id”:”dimensions-wheelbase”,”value”:”1723 mm
67.8 in.”},{“id”:”dimensions-front-axle-clearance”,”value”:””},{“id”:”dimensions-turning-radius-with-brakes”,”value”:”2.46 m
8.07 ft”},{“id”:”dimensions-turning-radius-without-brakes”,”value”:””},{“id”:”dimensions-limited-slip-differential”,”value”:””},{“id”:”dimensions-approximate-shipping-weight-(open-station;-cab)”,”value”:”Open station: 1320 kg
2910 lb
Cab: Not applicable”},{“id”:”tires-front”,”value”:”R1 Ag 7.00-12
R3 Turf 23×8.50-14
R4 Industrial 23×8.50-14
R3 Turf Radial 200/60 R15″},{“id”:”tires-rear”,”value”:”R1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20″},{“id”:”tires-front-tread-range”,”value”:””},{“id”:”tires-rear-tread-spacing”,”value”:””},{“id”:”miscellaneous-toolbox”,”value”:”Yes”},{“id”:”miscellaneous-tilt-steering-wheel”,”value”:”Yes”},{“id”:”miscellaneous-12-v-outlet”,”value”:”Yes”},{“id”:”additional-information-date-collected”,”value”:””}]}} ;
Be the first to review “John Deere 2038R Compact Tractor”
Related products
Compact Tractors
Compact Tractors
Compact Tractors
Compact Tractors
Compact Tractors
Compact Tractors
Compact Tractors
Compact Tractors
Reviews
There are no reviews yet.